Installation and Startup

1. Check to make sure that the MicroSD Card is inserted into the writer. The MicroSD card may likely be inserted before it is shipped to you. If for any reason it is not, please insert it now.
2. Connect your LightSpeed Neo to your computer using the included USB cable.
3. Momentarily press and hold the power button until the power light turns on, then release the power button.
4. Find and open the email that we sent to you for your Download for the LightSpeed Neo Software. Click the link in the email to go the the download page
   
5. 
   
6. Insert the provided flash drive into the PC USB socket. Locate the setup.exe file in the
   flash drive’s Zenith folder. “Double click” the setup file.
   
7. From the User Account Control “click yes”. (figure 2-1)
   
   1. LightSpeed Zenith Wizard / select “Next.”
   2. Select the desired Installation folder / select “Next.”
      
   3. Confirm Installation / select “Next.”
      
   4. An Installing Window will appear. Upon completion a new window will open
      confirming install completion.
8. Select the Windows Zenith icon to start the GUI software (figure 2-2).
9. The Zenith Graphic User Interface will open displaying the control panel. (figure 2-3).
10. Select Setting and then Options.
11. Select the Keyboard Model (figure 2-5) and click Save.
12. Return to main application window. If the button says Stop the unit is ready to use.
    Should it display “Start” then click the button.
13. If necessary, use the COM port drop-down to select the desired port assignment. Com
    5 is generally the default communication port and should be so designated in your CAT
    software.
14. Open your CAT program.
15. Continue to next page.